LoTherme-618S
DOWNLOAD SPECS
DOWNLOAD SPECS

For Hard-Facing, Wear-facing or Overlay Applications

LoTherme-618S

"Spray" electrode for roughening the cast-iron cane crushing rolls in the SUGAR industry. Equally efficient in both Wet & Dry arcing.

Characteristics

LoTherme-618 S has an aggressive "spray" type arc with excellent penetration to allow application while the mill is in operation. By attaching the earth clamp to the gearbox housing, arcing in the bearing area is avoided. It has been developed to resist the extreme load produced during crushing. The deposit is highly abrasion-resistant and also corrosion-resistant.

Applications

The application of LoTherme-618 S electrode on sugar mill rollers improves the grip on the cane, increases the quantity of sugar care crushed and, consequently, results in a higher sugar recovery.

Weld Metal Hardness

On Carbon Steel : 55 - 60 RC

On cast Iron : 58 - 62 RC

Welding Technique

In case of moisture pick-up, re-dry the electrodes at 200°C for one hour before use. Hold electrode vertical to work piece. Keep stable arc on moving roll for full spraying effect.

Current Conditions : DC (+) /AC


Size (mm)

Dia x Length

5x350
4x350
3.15x350
2.5x350
Current Range (Amps)
170-200
140-170
100-140
70-100


For Hard-Facing, Wear-facing or Overlay Applications

Contact Us

Choose any option to contact us